ผลงานตีพิมพ์ในวารสารวิชาการต่างประเทศ


ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2567 จำนวน 7 เรื่อง

  1. Fueangphakdee, P., Nimpaiboon, A., Junkong, P., Protein-Mediated ZnO Synthesis for Self-Healing in Natural Rubber, Macromol. Mater. Eng. 2024, 2300406.
  2. Obma, A., Bumrungpuech, R., Hemwech, P., Detsangiamsak S., Wirasate, S., Hauser, C.P., Chantiwas R., Efficient separation of organic anions in beverages using aminosilane-functionalized capillary electrophoresis with contactless conductivity detection, Analytical Chimica Acta, 1316 (2024), Article number 342815.
  3. Kusuktham, B., Suchiva, K., Udon, S., Grafting of polyester fabrics with methacrylic acid, Polymer Bulletin, https://doi.org/10.1007/s00289-024-05391-x
  4. Phupewkeaw, N., Sae-Oui, P., Sirisinha, C. Optimizing Processing Parameters for NR/EBC Thermoplastic Vulcanizates: A Comprehensive Full Factorial Design of Experiments (DOE) Strategy, Polymers, 16 (14), 1963.
  5. Boonsomwong, K., Saeoui, P., Sirisinha, C. Property investigation of ready-to-use silica-filled rubber composites containing a curing agent prepared by a simple latex compounding method,Industrial Crops & Products, 222 (2024) 119502.
  6. Yulianto, S.D., Wirasate, S., Sirisinha, C., Jariyaboon, M.,Raibhu, S., Studying Deliquescent Relative Humidity Lowering in Mixtures of Five Fertilizer Ingredients Using Mixture Experiments and a Special Cubic Equation, Engineered Science, 2024, 28, 1094.
  7. Obma, A., Bumrungpuech, R., Hemwech, P., Detsangiamsak, S., Wirasate, S.,Hauser, P. C., Chantiwas, R., Efficient separation of organic anions in beverages using aminosilane-functionalized capillary electrophoresis with contactless conductivity detection,Analytical Chimica Acta, 1316 (2024) Article number 342815.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2566 จำนวน 17 เรื่อง

  1. Buadit, T., Ussawarujikulchai, A., Suchiva, K. , Papong, S., Ma, H., Rattanapan., C. Environmental impact of passenger car tire supply chain in Thailand using the life cycle assessment method. Sustainable Production and Consumption, 37 (2023), 156-168.
  2. Klinthoopthamrong, N.,Thanawan, S., Schrodj G., Mougin, K., Goh, K.Amornsakchai, T., Synergistic toughening of epoxy composite with cellulose nanofiber and continuous pineapple leaf fiber as sustainable reinforcements. Nanomaterials, 2023, 13, 1703.
  3. Thongphang, C., Namphonsane, A., Thanawan, S., Chia, C.H., Wongsagonsup, R., Smith, S.M. and Amornsakchai,T., Toward a Circular Bioeconomy: Development of Pineapple Stem Starch Composite as a Plastic-Sheet Substitute for Single-Use Applications, Polymers, 2023, 15, 2388.
  4. Nuinu, P., Sirisinha, C., Suchiva, K., Daniel, P., Phinyocheep, P., Improvement of mechanical and dynamic properties of high silica filled epoxide functionalized natural rubber, Journal of Materials Research and Technology, 2023, 24: 2155-2168.
  5. Thaiwattananon, S., Thanawan, S., Amornsakchai, T., Effects of fiber surface modification on mechanical properties of short pineapple leaf fiber-carbon black reinforced natural rubber hybrid composites, IOP Conference Series: Materials Science and Engineering, 1280 (2023) 012017.
  6. Lorwanishpaisarn, N., Sae-Oui, P., Sirisinha, C., Siriwong, C., A new approach to the epoxidation of natural rubber through a sonochemical method,Industrial Crops and Products, 197, July 2023, Article number 116629.
  7. Srisawat, K., Harnnarongchai, W., Sirisinha, C., Sirisinha, K., Properties of poly(lactic acid)/cellulose nanofiber biocomposites: Effect of polymeric plasticizers, Materials Today: Proceedings, Volume 77, Part 4, January 2023, Pages 1127-1131.
  8. Namphonsane, A., Amornsakchai, T., Chia, C.H., Goh, K.L.,Thanawan, S., Wongsagonsup, R. and Smith, S.M Development of Biodegradable Rigid Foams from Pineapple Field Waste. Polymers 2023, 15, 2895.
  9. Nijpanich, S., Nimpaiboon,A., Rojruthai,P.,Park, J-H,Hagio T., Ichino, R. and Sakdapipanich,J., Preparation and Characterization of TiO2-Coated Hollow Glass Beads for Functionalization of Deproteinized Natural Rubber Latex via UVA-Activated Photocatalytic Degradation, Polymers, 15, 3885.
  10. Buadit, T., Ussawarujikulchai, A., Suchiva, K., Papong, S., Rattanapan, C., Green productivity and value chain analysis to enhance sustainability throughout the passenger car tire supply chain in Thailand, Journal of Open Innovation: Technology, Market, and Complexity, 9(3), September 2023, Article number 100108.
  11. Rattanawongkhae, S., Sunintaboon, P., Sa-nguanthammarong, P., Wirasate, S., Influence of poly(butyl acrylate-co-methacrylic acid) stabilized silver nanoparticles on mechanical and antibacterial properties of peroxide prevulcanized natural rubber,Reactive and Functional Polymers, 192, November 2023, Article number 105705.
  12. Suppanucroa, N., Nimpaiboon, A., Boonchuay, K., Khamkeaw, A., Phisalaphong, M., Green composite sponge of natural rubber reinforced with cellulose filler using alginate as a dispersing agent, Journal of Materials Research and Technology, 27, November 2023, 3119-3130.
  13. Surachaitanawat, N., Yulianto, D., Wirasate, S., Sirisinha, C.,Raibhu, S.,Jariyaboon, M. Development of new water-based anticaking agents for NPK fertilizers using response surface methodology, Journal of Applied Polymer Science, 140 (34), September 10, 2023, e54317.
  14. Hemwech, P., Obma, A., Detsangiamsak, S., Wirasate, S., Wilairat, P., Chantiwas, R., Capillary surface modification using millimolar levels of aminosilane reagent for highly efficient separation of phenolic acids and flavonols by capillary electrophoresis with UV detection, Phytochemical Analysis, 2023, 1–11.
  15. Duangsuwan, S., Amornsakchai, T., Phinyocheep, P., Thanawan, S., Achieving High-Performance Green Composites from Pineapple Leaf Fiber-Poly(butylene succinate) through Both Fiber Alignment and Matrix Orientation across the Thickness, Volume 8 (39), October 2023, 35693-35705.
  16. Amnatsin, C.,Kanlayakan, W., Lhosupasirirat, S., Verojpipath, N., Pragobjinda, B., Osotchan, T., Sirisinha, C., Srikhirin, T., Ultrafine Graphite Scrap and Carbon Blocks Prepared by High-Solid-Loading Bead Milling and Conventional Ball Milling: A Comparative Assessment, ACS Omega 2023, 8, 47919-47927.
  17. Duangsuwan, S., Junkong, P., Phinyocheep, P., Thanawan, S. , Amornsakchai, T., Development of Green Leather Alternative from Natural Rubber and Pineapple Leaf Fiber, Sustainability (Switzerland), Volume 15 (21), November 2023.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2565 จำนวน 7 เรื่อง

  1. Thaptong, P., Sae-Oui, P., Jittham, P., Sirisinha, C. Optimization of highly dispersible silica/carbon black hybrid filler ratio for tire tread based on solution- and emulsion-styrene butadiene rubber, Journal of Applied Polymer Science, 139(295), 2022 Article number e52608
  2. Limtrakul, A., Sae-Oui, P., Nillawong, M., Sirisinha, C. Influence of carbon black/silica hybrid ratio on properties of passenger car tire sidewall.Periodica Polytechnica Chemical Engineering, 66(1), 147–156.
  3. Sintharm, P., Nimpaiboon, A., Liao, Y.-C., Phisalaphong, M., Bacterial cellulose reinforced with skim/fresh natural rubber latex for improved mechanical, chemical and dielectric properties. Cellulose, 29(3), 1739–1758.
  4. Thanawan, S., Radabutra, S., Amornsakchai, T., Adhesion improvement between natural rubber and ethylene methylacrylate copolymer by surface chlorination. Kautschuk & Gummi-Kunststoff. 2022. 52-57.
  5. Mitsaichon,V., Ruaesrijan, K., Phinyocheep, P., Amornsakchai,T., Junkong,P., Thanawan, S.,Preparation of spent coffee grounds-rubber composites using natural rubber latex as binder. Journal of Metals, Materials and Minerrals. 32 (4), 161-166.
  6. Koeipudsa, N., Chanthateyanonth, R., Daniel, P., Phinyocheep, P., Development of natural rubber nanocomposites reinforced with cellulose nanocrystal isolated from oil palm biomass.Journal of Polymer Research.  29, Article number: 403 (2022). 
  7. Sirisinha. K., Wirasate, S., Sirisinha, C., Wattanakrai, N. One-pot reactive melt recycling of PLA post-consumer waste for the production of block copolymer nanocomposites of high strength and ductility. Polymers 2022, 14, 3642.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2564 จำนวน 7 เรื่อง

  1. Narongthong, J., Sirisinha, C., Sae-oui, P. Simultaneous effects of mixing parameters on internal mixing of rubber and carbon black using response surface methodology. Rubber World, 263 (6), 2021.
  2. Nijpanich, S., Nimpaiboon, A., Rojruthai, P., Sakdapipanich, J., Hydroxyl-terminated saponified natural rubber based on the H2O2/P25-TiO2 powder/UVC-irradiation system Polymers, 13(8), 2, 1319.
  3. Noipitak, P., Inphonlek, S., Nillawong, M., Sunintaboon, P., Amornsakchai, T., Chitosan/alginate composite porous hydrogels reinforced with PHEMA/PEI core–shell particles and pineapple-leaf cellulose fibers: their physico-mechanical properties and ability to incorporate AgNP, Journal of Polymer Research, 28(5), 182.
  4. Promlok, D., Kanjanaprayut, N., Kiatisereekul, N., Chanthateyanonth, R., Jariyaboon, M. Influence of food additives on blister formation in tinplate can of coconut milk, Journal of Food Engineering, 300, 110513.
  5. Surajarusarn, B., Thaiwattananon, S., Thanawan, S., Mougin, K., Amornsakchai, T. Realising the Potential of Pineapple Leaf Fiber as Green and High-performance Reinforcement for Natural Rubber Composite with Liquid Functionalized Rubber, Fibers and Polymers, 22, 2543–2551 (2021)
  6. Siriwong, C., Khansawai, P.,Boonchiangma, S.,Sirisinha, C.,Sae-Oui, P.The influence of modified soybean oil as processing aids in tire application, Polymer Bulletin, 78(7),3589-3606.
  7. Narongthong, J.,Sae-Oui, P.,Nillawong, M.,Sirisinha, C.Physicoelectrical properties and piezoresistive sensing of the extrusion-based conductive rubber composites: Simultaneous effects of the extrusion parameters, Rubber Chemistry and Technology,94 (1),48-66

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2563 จำนวน 15 เรื่อง

  1. Sirisinha, C., Sae-oui, P., Suchiva, K., Thaptong, P. Properties of tire tread compounds based on functionalized styrene butadiene rubber and functionalized natural rubber. Journal of Applied Polymer Science, 137(20),48696.
  2. Narongthong, J., Wießner, S., Hait, S., Sirisinha, C., Stöckelhuber, K.W. Strain-rate independent small-strain-sensor: Enhanced responsiveness of carbon black filled conductive rubber composites at slow deformation by using an ionic liquid. Composites Science and Technology. 188,107972.
  3. Boonsomwong, K., Genix, A.C., Chauveau, E., Fromental, J.M., Dieudonne-George, Sirisinha, C., Oberdisse, J. Rejuvenating the structure and rheological properties of silica nanocomposites based on natural rubber. Polymer 189,122168.
  4. Sriring, M., Nimpaiboon, A., Kumarn, S., Higaki, K, Higaki, Y, Kojio, K., Takahara, A., Ho, C.C., Sakdapipanich, J. Film formation process of natural rubber latex particles: roles of the particle size and distribution of non-rubber species on film microstructure. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 592,124571.
  5. Sriring, M., Nimpaiboon, A., Kumarn, S., Takahara, A., Sakdapipanich, J. Enhancing viscoelastic and mechanical performances of natural rubber through variation of large and small rubber particle combinations. Polymer Testing. 81,106225.
  6. Massaesa, I. Sirisinha, C., Influence of aromatic content in rubber process oils on properties of natural rubber/butadiene rubber (NR/BR) blends for tyre sidewall component. Kautschuk & Gummi-Kunststoff. 73(3): 49-54.
  7. Inphonlek, S., Niamsiri, N., Sunintaboon, P. Sirisinha, C., Chitosan/xanthan gum porous scaffolds incorporated with in-situ-formed poly (lactic acid) particles: Their fabrication and ability to adsorb anionic compounds. Colloids and Surface A603. (2020) 12563.
  8. Tessanan, W., Chanthateyanonth, R., Yamaguchi, M., Phinyocheep, P., Improvement of mechanical and impact performance of poly(lactic acid) by renewable modified natural rubber. Journal of Cleaner Production. 276 (2020), 123800.
  9. Nimpaiboon, A., Thammawiset, P., Identification of plastic and rubber products by pyrolysis gas chromatography/mass spectrometry. Polymertech. 2(2020), 35-40.
  10. Phomrak, S., Nimpaiboon, A., Newby, B.M.Z., Phisalaphong, M., Natural rubber latex foam reinforced with micro- and nanofibrillated cellulose via Dunlop Method. Polymers.12(9), 2020, 1959.
  11. Narongthong, J., Sae-oui, P., Nillawong, M., Sirisinha, C., Physico-electrical properties and piezoresistive sensing of the extrusion-based conductive rubber composites: the simultaneous effects of the extrusion parameters, Rubber Chemistry and Technology, https://doi/10.5254/rct.20.80392, 20 Feb. 2020
  12. Thepsuwan, U., Intiya, V., Sa-nguanthammarong, P., Sae-oui,P., Sirisinha, C., and Thaptong, P. Reinforcement of bakelite moulding powder in acrylonitrile butadiene rubber (NBR): In comparison with cashew nut oil modified phenolic resin, Scientific Review, 6 (4), 28-35, 2020
  13. Siriwong, C., Khansawai, P., Boonchiangma, S., Sirisinha, C., Sae-oui, P. The influence of modified soybean oil as processing aids in tire application, Polymer Bulletin (2020), DOI 10.1007/s00289-020-03296-z.
  14. Buadit, T., Rattanapan, C., Ussawarujikulchai, A., Suchiva, K., Papong, S.,Ma, H.-W., Life cycle assessment of material recovery from pyrolysis process of end-of-life tires in Thailand. International Journal of Environmental Science and Development, 11(10), 493-498.
  15. Nimpaiboon, A., Sriring, M., Kumarn, S., Sakdapipanich, J., Reducing and stabilizing the viscosity of natural rubber by using sugars: Interference of the Maillard reaction between proteins and sugars. Journal of Applied Polymer Science, 137(45), 49389.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2562 จำนวน 6 เรื่อง

  1. Thepsuwan, U., Sae-oui, P., Sirisinha, C., Thaptong,P. Influence of halloysite nanotube on properties of tire tread compounds filled with silica and carbon black hybrid filler. Journal of Applied Polymer Science. 136 (4) 20,46987.
  2. Narongthong, J., Lee, H.H., Das, A., Sirisinha, C., Wießner, S., Ionic liquid enabled electrical-strain tuning capability of carbon black based conductive polymer composites for small-strain sensors and stretchable conductors, Composites Science and Technology 174 (2019) 202-211.
  3. Suchiva, K., Sirisinha, C., Sae-oui, P., Thapthong, P. Development of tyre tread compounds for good wet-grip : effects of rubber type. IOP Conference Series: Materials Science and Engineering: 526(1),012035.
  4. Sriring, M., Nimpaiboon, A., Dechnarong, N., Kumarn, S.,Higaki, Y., Kojio, K.,Takahara, A., Ho, C.C., Pre-Vulcanization of large and small natural rubber latex particles: film-forming behavior and mechanical properties. Macromolecular Materials and Engineering, 304(9),1900283.
  5. Pattanawanidchai, S., Sae-Oui, P., Sirisinha, C., Siriwong, C. Cure retardation of peroxide-cured silica filled natural rubber influenced by organosilane, Polymer Engineering and Science 59(1), 42-48
  6. Narongthong,J., Sae-oui,P., Sirisinha,C., Effects of the extrusion parameters of a co-rotating twin screw extruder and their interactions on the properties of carbon black filled styrene-butadiene rubber, Kautschuk & Gummi-Kunststoffe, 73(10), 63-71.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2561 จำนวน 7 เรื่อง

  1. Pattanawanidchai, P., Sae-oui ,P., Sirisinha, C., Siriwong, C. Cure retardation of peroxide‐cured silica filled natural rubber influenced by organosilane. Polymer Engineering and Science. April 2018.
  2. Nimpaiboon, A.,Sakdapipanich, J., Sriring, M.,Rojruthai, P. Improved compatibility between silica and natural rubber by the use of carbonyl-terminated low molecular-weight natural rubber. Kautschuk Gummi Kunststoffe. 71(3): 39-45.
  3. Dechnarong, N., Nimpaiboon, A., Kumarn, S., Phinyocheep, P., Sakdapipanich, J. Compatibility enhancement of silica and natural rubber compound using UVA-induced silane-grafted saponified skim natural rubber. Journal Polymer Research 2018 Jan;25(1):17.
  4. Narongthong, J., Leb, H., Wießner, S., Sirisinha, C., An efficient highly flexible strain sensor: Enhanced electrical conductivity, piezoresistivity and flexibility of a strongly piezoresistive composite based on conductive carbon black and an ionic liquid, Composites Part A 113 (2018) 330–338.
  5. Sriring, M., Nimpaiboon, A., Kumarn, S., Sirisinha, C., Sakdapipanicha, J., Toki, S., Viscoelastic and mechanical properties of large- and small-particle natural rubber before and after vulcanization, Polymer Testing, 70 (2018) 127–134.
  6. Kumarn, S., Churinthorn, N., Nimpaiboon,A., Sriring, M., Ho., C.C., Takahara, A., Sakdapipanich, J., Investigating the mechanistic and structural role of lipid hydrolysis in the stabilization of ammonia-preserved Hevea rubber latex, Langmuir 2018, 34, 12730−12738.
  7. Narongthong, J., Sae-oui, P.,Sirisinha, C. Effects of mixing parameters and their interactions on properties of carbon black filled styrene-butadiene rubber, Rubber Chemistry and Technology, 91 (3), 521-536.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2560 จำนวน 13 เรื่อง

  1. Intiya, W., Thepsuwan, U., Sirisinha, C., Sae-oui, P. Possible use of sludge ash as filler in natural rubber. Journal of Material Cycles and Waste Management 2017; 19(2): 774-781.
  2. Saleesung, T., Sae-oui, P., Sirisinha, C. Assessment of crosslink network and network defects of unfilled and filled ethylene-propylene-diene terpolymer using solid state nuclear magnetic relaxation spectroscopy. Journal of Applied Polymer Science 2017; 134 (4): Article number 44224.
  3. Saleesung, T., Sae-oui, P., Sirisinha, C, Cure and scorch in the processing of ethylene-propylene-diene terpolymer (EPDM). Journal of Applied Polymer Science 2017, 134 (9): Article number APP44523.
  4. Hariwongsanupab, N., Thanawan, S., Amornsakchai, T., Vallat, M.F., Mougin, K. Improving the mechanical properties of short pineapple leaf fiber reinforced natural rubber by blending with acrylonitrile butadiene rubber. Polymer Testing, 2017; 57: 94-100.
  5. Boonrasi, S., Sae-oui, P., Wirasate, S., Suchiva, K. Effects of bio-based oils on processing properties and cure characteristics of silica-filled natural rubber compounds. Journal of Rubber Research, 2017; 20(1): 1-19.
  6. Siriwong, C., Sae-oui, P., Sirisinha, C. Performance comparison of various surface modifying agents on properties of silica-filled chloroprene rubber. Rubber Chemistry Technology 2017;90(1):146-158.
  7. Siririttikrai, N., Thanawan, S., Suchiva, K., Amornsakchai, T., Comparative study of natural rubber/clay nanocomposites prepared from fresh or concentrated latex. Polymer Testing, August 2017.
  8. Moonprasith, N., Poonsrisawat,A., Champreda, V., Kongkaew, C., Loykulnant, S., Suchiva, K. Deproteinization of nonammonia and ammonia natural rubber latices by ethylenediaminetetraacetic acid. Advances in Materials Science and Engineering, Volume 2017, Article ID 1516945.
  9. Thaptong, P., Sae-oui, P., Sirisinha, C., Influences of styrene butadiene rubber and silica types on performance of passenger car radial tire tread. Rubber Chemistry and Technology, 90(4):699-713.
  10. Sae-oui, P., Suchiva, K., Sirisinha, C., Intiya, W., Yodjun, P., Thepsuwan, U., Effects of blend ratio and SBR type on properties of carbon black-filled and silica-filled SBR/BR tire tread compounds., Advance in Materials Science and Engineering 2017: Article ID 2476101.
  11. Pittayavinai, P.,Thanawan, S., Amornsakchai, T. Comparative study of natural rubber and acrylonitrile rubber reinforced with aligned short aramid fiber, Polymer Testing, 64 (December 2017): 109-116.
  12. Thongseenuch, S., Taweepreda, W., Suchiva, K., Effect of low molecular weight natural rubber on mixing and vulcanized properties of low energy processing natural rubber, Sains Malaysian, 46(9):1379-1384.
  13. Sainumsai, W., Toki, S., Amnuaypornsri, S., Nimpaiboon, A., Sakdapipanich, J., Rong, L., Hsiao, B.S., Suchiva, K., Dependence of the onset of strain-induced crystallization of natural rubber and its synthetic analogue on crosslink and entanglement by using synchrotron X-ray, Rubber Chemistry and Technology. 90(4):728-742.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2559 จำนวน 8 เรื่อง

  1. Pittayavinai, P., Thanawan, S., Amornsakchai, T. Manipulation of mechanical properties of short pineapple leaf fiber reinforced natural rubber composites through variations in cross-link density and carbon black loading. Polymer Testing, 2016; 54: 84-89.
  2. Thaptong, P., Sae-oui, P., Sirisinha, C. Effects of silanization temperature and silica type on properties of silica-filled solution styrene butadiene rubber (SSBR) for passenger car tire tread compounds. Journal of Applied Polymer Science. 2016; 133 (17): Article number 43342.
  3. Nillawong, M., Sae-Oui, P., Suchiva, K., Sirisinha, C. Properties of SBR filled with carbon black and aramid pulp hybrid filler: Comparison between predispersed aramid pulp and conventional aramid pulp. Rubber Chemistry and Technology 2016; 89(4): 640-652.
  4. Boonbumrung, A. Sae-oui, P, Sirisinha, C., Nimpaiboon, A., Amnuaypornsri, S., Sakdapipanich, J.T. Reinforcement of multiwalled carbon nanotube in nitrile rubber: In comparison with carbon black, conductive carbon black, and precipitated silica. Journal of Nanomaterials; 2016: Article number 6391572.
  5. Nimpaiboon, A., Amnuaypornsri, S., Sakdapipanich, J.T., Obstruction of storage hardening in NR by using polar chemical. Rubber Chemistry and Technology 2016; 89(2): 358-368.
  6. Nimpaiboon, A., Sriring, M., Sakdapipanich, J.T. Molecular structure and storage hardening of natural rubber: Insight into the reactions between hydroxylamine and phospholipids linked to natural rubber molecule. Journal of Applied Polymer Science 2016; 133 (31): Article number APP43753.
  7. Sa-Nguanthummarong, P., Asavapichayachote, S., Suchiva, K., Wisasate, S., Sirisinha., C. Influence of surface roughness on film formation and film properties of polypropylene dipping former. Kautschuk Gummi Kunststoffe 2016; 11-12: 36-42.
  8. Pangamol, P., Suchiva, K. Improvement of ozone resistance of NR/EPDM blends via adjusting viscosity ratio. Kautschuk Gummi Kunststoffe 2016; 7-8:50-52.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2558 จำนวน 5 เรื่อง

  1. Saleesung, T., Reichert, D., Saalwächter, K. , Sirisinha, C. Correlation of crosslink densities using solid state NMR and conventional techniques in peroxide-crosslinked EPDM rubber. Polymer (United Kingdom) 2015; 56:309-317.
  2. Nillawong, M., Sirisinha, C. Effects of TESPT loading and mixing condition on properties of silica-filled HNBR cured with peroxide: Correlation of bound rubber content, viscoelastic and mechanical properties. Kautschuk & Gummi-Kunststoff, 2015; 68(1-2):41-48.
  3. Tuampoemsab, S., Nimpaiboon, A., Sakdapipanich, J.T. Influence of mixed layer of proteins and phospholipids on the unique film formation behavior of Hevea natural rubber latex. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2015; 466:100-106.
  4. Tuampoemsab, S., Nimpaiboon, A., Sakdapipanich, J.T. Quantitative analysis of isoprene units in natural rubber and synthetic polyisoprene using 1H-NMR spectroscopy with an internal standard. Polymer Testing; 2015; 43:21-26.
  5. Prukkaewkanjana, K., Thanawan, S., Amornsakchai, T. High performance hybrid reinforcement of nitrile rubber using short pineapple leaf fiber and carbon black. Polymer Testing. 2015; 45:76-82.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2557 จำนวน 14 เรื่อง

  1. Sanprasert, P., Sombatsompop, N., Sae-oui, P., Sirisinha, C. Cotton fibers reinforcement of HNBR: Control of fiber alignment and its influence on properties of HNBR vulcanizates. Journal of Applied Polymer Science 2014: 131 (22):41090 (1-9).
  2. Prateeprat, P., Suchiva, K. , Sirisinha, C. Study of rheological behavior and extrudate surface quality of rubber compounds. Advanced Materials Research 2014; 844:144-148.
  3. Pattanawanidchai, S., Loykulnant, S., Sae-oui, P., Maneevas, N., Sirisinha, C. Development of eco-friendly coupling agent for precipitated silica filled natural rubber compounds. Polymer Testing 2014; 34:58-63.
  4. Nillawong, M., Sirisinha, C. Optimization of mixing conditions for TESPT Silane Treatment in Silica-filled NBR system: Correlation of Bound Rubber Content to viscoelastic and mechanical Properties. KGK Kautschuk Gummi Kunststoffe; 2014; 67(6): 32-38.
  5. Chokanandsombat, Y., Sirisinha, C. Influence of aromatic content in rubber processing oils on viscoelastic behaviour and mechanical properties of styrenebutadiene-rubber for tyre tread applications. Polymers and Polymer Composites 2014; 22(7): 599-606.
  6. Thaptong, P., Sirisinha, C., Thepsuwan, U., Sae-oui, P. Properties of natural rubber reinforced by carbon black-based hybrid fillers. Polymer - Plastics Technology and Engineering 2014;53(8): 818-823.
  7. Sae-oui, P. , Thepsuwan, U. , Thaptong, P. , Sirisinha, C. Comparison of reinforcing efficiency of carbon black, conductive carbon black, and carbon nanotube in natural rubber. Advances in Polymer Technology 2014;33(4):21422 (1-7)
  8. Sae-oui, P. , Sirisinha, C. , Thepsuwan, U. Property modification of chloroprene rubber by addition of ultra-fine acrylic rubber powder. Plastics, Rubber and Composites 2014; 43(7):211-216.
  9. Boonbumrung A., Sae-oui P., Sirisinha C. Dispersion enhancement of multi-walled carbon nanotubes in nitrile rubber. Int Polym Proc 2014;29(3):317-24.
  10. Nimpaiboon, A., Amnuaypornsri, S. , Sakdapipanich, J. Role of gel content on the structural changes of masticated natural rubber. Advanced Materials Research 2014; 844: 101-104.
  11. Smitthipong,W., Tantatherdtam, R., Rungsanthien,K., Suwanruji,P., Klanarong, S., Radabutra, S., Thanawan, S., Vallat, M.F., Nardin, M., Mougin,K., Chollakup, R. Effect of Non-Rubber Components on Properties of Sulphur Crosslinked Natural Rubbers. Advanced Materials Research 2014; 844:345-348.
  12. Vallat, M.F., Radabutra, S., Thanawan, S. Influence of non-rubber components on NR surface modification by chlorination. Advanced Materials Research 2014; 844:369-372
  13. Wisittanawat, U., Thanawan, S., Amornsakchai, T. Remarkable improvement of failure strain of preferentially aligned short pineapple leaf fiber reinforced nitrile rubber composites with silica hybridization. Polymer Testing 2014; 38:91-99.
  14. Wisittanawat, U., Thanawan, S., Amornsakchai, T. Mechanical properties of highly aligned short pineapple leaf fiber reinforced - nitrile rubber composite: Effect of fiber content and bonding agent. Polymer Testing 2014; 35:20-27.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2556 จำนวน 5 เรื่อง

  1. Prasertsri, S., Lagarde, F., Rattanasom, N., Sirisinha, C., Daniel, P. Raman spectroscopy and thermal analysis of gum and silica-filled NR/SBR blends prepared from latex system. Polymer Testing, 2013; 32(5):852-61.
  2. Pangamol, P., Sirisinha, C., Hu, Y.F., Urquhart S.G., Effectiveness of by-product sulfur from petroleum refining as a rubber vulcanizing agent: A XANES investigation. Industrial & Engineering Chemistry Research, 2013; 52(48):17179-83.
  3. Kueseng, P., Sae-oui, P., Sirisinha, C., Jacob, K.I., Rattanasom, N., Anisotropic studies of multi-wall carbon nanotube (MWCNT)-filled natural rubber (NR) and nitrile rubber (NBR) blends. Polymer Testing, 2013; 32(7):1229-36.
  4. Chokanandsombat, Y., Sirisinha, C., MgO and ZnO as reinforcing fillers in cured polychloroprene rubber. Journal of Applied Polymer Science, 2013; 128(4):2533-40.
  5. Nimpaiboon, A., Sakdapipanich, J. A model study on effect of glucose on the basic characteristics and physical properties of natural rubber Polymer Testing, 2013; 32(8): 1408-1416.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2555 จำนวน 4 เรื่อง

  1. Chaikumpollert, O., Yamamoto, Y., Suchiva, K., Nghia, P.T., Kawahara, S. Preparation and characterization of protein-free natural rubber. Polym Adv Technol 2012 Apr;23(4):825-8
  2. Chaisuriyathepkul, A., Suchiva, K., Sae-oui, P., Sirisinha, C. Mixing efficiency in co-rotating batch mixer for preparation of NR/EPDM blends. J Appl Polym Sci 2012 Mar;123(6):3688-95
  3. Duangphet, S., Jenjob, S., Sunintaboon, P., Rattanasom, N., Thanawan, S. Physico-mechanical properties of natural rubber sheets coated by polyethyleneimine-functionalized poly(methyl methacrylate) nanoparticles. J Appl Polym Sci 2012 Apr;124(1):49-57.
  4. Rattanasom, N., Kueseng, P., Deeprasertkul, C. Improvement of the mechanical and thermal properties of silica-filled polychloroprene vulcanizates prepared from latex system. J Appl Polym Sci 2012 Apr;124(4):2657-68

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2554 จำนวน 3 เรื่อง

  1. Wongwitthayakool, P., Sae-oui, P., Sirisinha, C. Prediction of heat build-up behaviour under high load by use of conventional viscoelastic results in carbon black filled hydrogenated nitrile rubber. Plast Rubber Compos 2011 Jun;40(5):234-9.
  2. Kongvasana, N., Kositchaiyong, A., Wimolmala, E., Sirisinha C, Sombatsompop N. Fly ash particles and precipitated silica as fillers in NR/CR vulcanizates under thermal and thermal-oil ageing. Polym Adv Technol 2011 Jun;22(6):1014-23
  3. Sae-oui, P., Sirisinha, C., Intiya, W., Thaptong P. Properties of natural rubber filled with ultrafine carboxylic acrylonitrile butadiene rubber powder. Adv Polym Tech 2011;30(3):183-90.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2553 จำนวน 8 เรื่อง

  1. Kongkaew, C., Loykulnant, S., Chaikumpollert, O., Suchiva K. Creaming of Skim Natural Rubber Latex with Chitosan Derivatives. J Appl Polym Sci 2010 Mar;115(2):1022-31
  2. Nillawong, M., Sombatsompop, N., Sirisinha, C. Viscoelastic Properties of Nitrile Rubber Filled with Lignite Fly Ash. J Appl Polym Sci 2010 Jun;116(6):3497-3502.
  3. Sae-oui, P., Sirisinha, C., Hatthapanit, K. Properties of natural rubber filled with ultra fine acrylate rubber powder. J Elastom Plast 2010 Mar;42(2):139-150
  4. Sae-oui P., Sirisinha, C., Sa-nguanthammarong P., Thaptong, P. Properties and recyclability of thermoplastic elastomer prepared from natural rubber powder (NRP) and high density polyethylene (HDPE). Polym Test 2010 May;29(3):346-351
  5. Sae-oui, P., Sirisinha, C., Thaptong, P., Intiya, W. Possible use of ultra-fine acrylonitrile butadiene rubber powder as filler in natural rubber vulcanizates. J Appl Polym Sci 2010 Oct;118(1):353-58
  6. Saleesung, T., Sae-oui, P., Sirisinha, C. Mechanical and thermal properties of thermoplastic elastomer based on low density polyethylene and ultra-fine fully-vulcanized acrylonitrile butadiene rubber powder(UFNBRP). Polym Test 2010 Dec; 29(8):977-83
  7. Santawisuk, W., Kanchanavasita, W., Sirisinha, C., Harnirattisai, C. Dynamic viscoelastic properties of experimental silicone soft lining materials. Dent Mater J 2010 Aug 7;29(4):454-60
  8. Wongwitthayakool, P., Sirisinha, C., Sae-oui, P. Cure and viscoelastic properties of HNBR. KGK-Kautschuk Gummi Kunststoffe 2010 Nov; 63(11):506-12

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2552 จำนวน 3 เรื่อง

  1. Prasopnatra, P., Sae-oui P., Sirisinha, C. Rheological properties of recycled chlorinated polyethylene/natural rubber blends vulcanized by sulfur. J Appl Polym Sci (2009), 111(2):1051-6.
  2. Smitthipong, W., Nardin, M., Schult, J., Suchiva, K. Adhesion and self-adhesion of immiscible rubber blends. Int J Adhes Adhes (2009), 29(3):253-8.
  3. Thanawan, S., Radabutra, S., Thamasirianunt, P., Amornsakchai, T., Suchiva, K. Origin of phase shift in atomic force microscopic investigation of the surface morphology of NR/NBR blend film. Ultramicroscopy (2009), 109(2):189-92.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2551 จำนวน 5 เรื่อง

  1. Phewphong, P., Sae-oui, P., Sirisinha, C. Mechanism of silica reinforcement in CPE/NR blends by the use of rheological approaches. J Appl Polym Sci (2008), 107(4):2638-45.
  2. Phewphong, P., Sae-oui, P., Sirisinha, C. The use of dynamic mechanical thermal analysis technique for determining an uneven distribution of precipitated silica in CPE/NR blends. Polym Test (2008), 27(7):873-80.
  3. Wangkiet, R., Sucharitpwatskul, S., Sirisinha C., Deeprasertkul C., Sae-oui P., Characterization of material constants based on synthetic biaxial data. ScienceAsia (2008), 34(4): 395-399.
  4. Sae-oui, P., Sirisinha, C., Hatthapanit, K., Phewthongin N. Influence of magnesium carbonate loading on the compound properties of polychloroprene, natural rubber, and their blends. J Appl Polym Sci (2008), 110(5):2763-2769.
  5. Sombatsompop, N., Wimolmala, E., Sirisinha, C. Fly ash particles and precipitated silica as fillers in rubbers. III. Cure characteristics and mechanical and oil-resistance properties of acrylonitrile-butadiene rubber. J Appl Polym Sci (2008), 110(5):2877-2883.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2550 จำนวน 5 เรื่อง

  1. Rattanasom, N., Saowapark, T. Deeprasertkul, C. Reinforcement of natural rubber with silica/carbon black hybrid filler, Polym Test (2007), 26: 369-377.
  2. Smitthipong, W., Nardin, M., Schultz, J., Suchiva, K., Adhesion and self-adhesion of rubbers, crosslinked by electron beam irradiation, International Journal of Adhesion and Adhesives (2007), 27(5): 352-357.
  3. Sae-oui, P., Sirisinha, C., Thepsuwan, U., Thapthong, P., Influence of accelerator type on properties of NR/EPDM blends, Polym Test (2007), 26(8): 1062-1067.
  4. Sae-oui P., Sirisinha C., Thepsuwan U., Hatthapanit K., Dependence of mechanical and aging properties of chloroprene rubber on silica and ethylene thiourea loadings, Eur Polym J (2007), 43(1): 185-193.
  5. Chaiyut, N., Amornsakchai, T., Thanawan, S., Force volume imaging of defects in highly drawn high-density polyethylene, Polym Test (2007), 26(3): 396-401.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2549 จำนวน 2 เรื่อง

  1. Sae-Oui, P., Sirisinha, C., Thepsuwan, U., Hatthapanit, K., Roles of silane coupling agents on properties of silica-filled polychloroprene, Eur Polym J (2006), 42(3): 479-486.
  2. Sajjayanukul, T., Sae-oui P., Sirisinha, C. Analysis of bulk dynamic properties in two-layered natural rubber vulcanisates, Polym-Plast Technol (2006), 45(1): 77-83

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2548 จำนวน 6 เรื่อง

  1. Phewthongin N., Sae-oui P., Sirisinha C. A study of rheological properties in sulphur vulcanised CPE/NR blends, Polym Test (2005), 24: 227-233.
  2. Pattanawanidchai, S., Sae-oui P., Sirisinha C. Influence of precipitated silica on dynamic mechanical properties and resistance to oil and thermal aging in CPE/NR blends. J Appl Polym Sci (2005), 96(6): 2218-2224.
  3. Sae-oui, P., Sirisinha, C., Hatthapanit K, Thepsuwan U. Comparison of reinforcing efficiency between Si-69 and Si-264 in an efficient vulcanization system. Polym Test (2005), 24(4): 439-446.
  4. Sajjayanukul, T., Sae-oui, P., Sirisinha, C. Experimental analysis of viscoelastic properties in carbon black-filled natural rubber compounds. J Appl Polym Sci (2005), 97(6): 2197-2203.
  5. Rattanasom, N., Suchiva, K. Rheological and processing properties of purified natural rubber. J Appl Polym Sci (2005), 98(1): 456-465.
  6. Rattanasom, N., Thammasiripong, U., Suchiva, K. Mechanical properties of deproteinized natural rubber in cemparison with synthetic cis-1, 4 polyisoprene vulcanizates: Gum and black-filled vulcanizates. J Appl Polym Sci (2005), 97(3): 1139-1144.

ผลงานตีพิมพ์ในวารสารต่างประเทศ ปี 2547 จำนวน 5 เรื่อง

  1. Rattanasom, N., Saowapark, T. Deeprasertkul, C. Reinforcement of natural rubber with silica/carbon black hybrid filler, Polym Test (2007), 26: 369-377.
  2. Smitthipong, W., Nardin, M., Schultz, J., Suchiva, K., Adhesion and self-adhesion of rubbers, crosslinked by electron beam irradiation, International Journal of Adhesion and Adhesives (2007), 27(5): 352-357.
  3. Sae-oui, P., Sirisinha, C., Thepsuwan, U., Thapthong, P., Influence of accelerator type on properties of NR/EPDM blends, Polym Test (2007), 26(8): 1062-1067.
  4. Sae-oui, P., Sirisinha, C., Thepsuwan, U., Hatthapanit, K.,Dependence of mechanical and aging properties of chloroprene rubber on silica and ethylene thiourea loadings, Eur Polym J (2007), 43(1): 185-193.
  5. Chaiyut, N., Amornsakchai, T., Thanawan, S., Force volume imaging of defects in highly drawn high-density polyethylene, Polym Test (2007), 26(3): 396-401.
ศูนย์วิจัยเทคโนโลยียาง คณะวิทยาศาสตร์ มหาวิทยาลัยมหิดล

999 อาคารวิทยาศาสตร์ 3 ถนนพุทธมณฑลสาย 4 ตำบลศาลายา อำเภอพุทธมณฑล จังหวัดนครปฐม 73170
โทรศัพท์: 0 2441 0511 มือถือ: 080 771 7098
E-mail: info@mahidolrubber.org
Copyright©2020 Rubber Technology Research Centre